|
 |
 |
|
|
|
Finding a Solution to Match Your Needs
 The Foam Selection Guide below will give you a quick idea of the type of foam
solution pinta might suggest for your application. pinta offers a wide
variety of foams, laminates, finishing materials and special treatments to
deliver a custom foam solution for your specific application.
Technical Data Sheets for the foams are listed in the far right column. These
are intended to aid design engineers in finding the best foam to meet their
product or design challenges. The sheets offer valuable information on the
properties of foam materials including: applications and physical properties
such as density, compression force, tensile strength, tear strength and
flammability.
 If you would like a foam card, samples or more information,
click here.
A good article describing foam's various applications...
Click on the icon to download a reprinted article from Machine Design Magazine.
Water resistant, absorbent, porous, and flame-retardant – foam is an ideal
material for many industrial applications.
| Application Need |
Custom Foam Solution |
Possible Foams |
|
Telecommunication headsets
• Ear, headband cushions
• Microphone covers
|
Open cell urethane foams, acoustically tuned for performance.
|
R-200U,
R-600U, NR-100,
P-80Z, P-100Z
|
|
|
Filtration
• Air/particulate
• Liquid/baffles |
Reticulated foams, with or without woven and non-woven media. |
P-10Z,
P-50Z,
P-72Z,
P-100Z
|
|
|
Acoustic absorbers
• Generator sets
• Compressors
• Marine/RV/aircraft |
Open cell urethane, willtec®, and willmid® foams. Surface treatments: films, impregation. |
willtec, willmid, R-200U
|
|
|
Dispensing
• Liquid applicators
• Fluid regulation/delivery |
Reticulated absorbent and hydrophilic foams. Felted foams for wicking and dispensing. |
willsorb,
RF2.5-900Z,
P-100Z,
E-200UCHAR
|
|
|
Industrial components
• Polishing pads
• Gaskets/seals
• Composites/laminates |
Tear-resistant, high strength open cell foams. Closed cell and low-permeability foams. Specially developed materials, adhesives and films. |
HD-150S,
R-200U,
N-200A, LP-180
|
|
|
Sporting goods
• Body protection
• Anti-skid pads
• Goggles seals, vents |
Impact-absorbing foams. Molded weather-resistant polyethylene foams. Comfortable, breathable, bio-compatible foams. |
N-200, L-200, E-015,
L-200G
|
|
|
Thermal insulation
• Heat insulators and shields
• Reflective and water-repellent shields |
Urethane, willtec, willtec H™ and willmid foams with reflective coatings. Impregnations to resist chemicals, moisture and oil. |
willtec, willmid, R-200U
|
|
|
Medical assemblies
• Braces, supports, wound care
• Temperature management
• Solution delivery and containment
|
Filter, hydrophilic, bio-compatible foams. Visco-elastic and polyethylene foams. Special composites and coatings. |
L-200G,
N-200, willsorb
|
|
|
Protective packaging
• Electronics
• Medical
• Cushioning
|
Urethane, polyethylene, anti-static, conductive and molded-to-fit foams. |
R-200U,
N-200,
L-200G,
D-200A/S,
C-600XJ
|
Phone: 800/438-0678
E-mail: sales@pinta-foamtec.com
|
|
|
|
|
|
